WebMachinist.Net

The Ultimate Online Source of Machinist Related Stuff!

Home / Contact / Testimonials / Upgrade / Web Machinist Software / Free Demo / Site Map Site Last Updated: 4/14/14

Save $40

Web Machinist 5.0 now Available! Click Here

The “Swiss Army Knife” for Machinists! 45+ Machining Calculators Included!

Web Machinist v 4.8 Software for Windows, Includes 48 Calculators!

To Purchase “Web Machinist 4.8” Please Click Here

New! Just released Web Machinist 4.8 for Windows!

What’s New in Web Machinist 4.8? Check it out:

The Simple Lathe Cam tool tip radius compensation calculator in Web Machinist 4.8
now includes a “Cut-

The Machining Formulas Reference Guide in Web Machinist 4.8 now includes a Calculator for each set of machining formulas. More Info

The Drill Index in Web Machinist 4.8 is now the “Smart Drill Index” Not only does this Drill Index provide the sizes of Fractional, Number, Letter and Metric drills in both inches and millimeters but also suggests the speed and feed rates for common metals! More Info

Web Machinist Software is an all inclusive program for windows computers (Windows 95, XP, 7, 8).

45 Calculators Included!

Calculators in the program include:

- Angles Conversion Calculator
- Area Calculator
- Bolt Circle Patterns Calculator
- Center Drill Dimensions Calculator
- Circle Segments Calculator
- Counter Sinks Calculator
- Custom Tap Calculator
- Cutting Speeds Calculator
- Degrees Conversion Calculator
- Dovetail Measuring Calculator
- Drill Peck Calculator
- Drill Point Length Calculator
- Feed Rate Calculator
- Gage Block Calculator
- Hole Location Calculator
- Lease Payment & Loan Amortization Calculator
- Metal Removal Rate Calculator
- Metal Weights Calculator
- Metric Conversions Calculator
- Right Triangles Solutions Calculator
- Simple Lathe Cam Tool Radius Compensation Calculator
- Sine Bar Sine Plate Calculator
- Smart Drill Index, Gives Drill Sizes and Speeds and Feed Rates.
- Soft Jaws Milling Calculator
- Speeds and Feeds Conversions Calculator
- Tapping Calculator
- Tap Drills & Feed Rates Calculator
- Threading Calculator
- True Position Calculator
- Wheel Bolt Patterns Calculator
- 3 Wire Thread Measuring Calculator

Reference Tools in the Program Include:

- Blue Print Symbols
- Screw Sizes for both Cap Screws and Self Tapping Screws
- Drill Index
- Machining Formulas Including 7 Calculators
- Tap Drill Sizes

To download a free demo to see if it works for you, please click below:

Download
Free Demo

Below are a Some Screen Shots from the program:

Below is the Main Screen of "Simple Lathe Cam". As you can see there are 13 different
Tool Radius Compensation calculators within "Simple Lathe Cam" 6 tool radius compensation
calculators for the OD and 6 tool radius compensation calculators for the ID on parts
running on a CNC Lathe. Also included is a "Cut-

In Simple Lathe Cam you can easily calculate tool radius compensation for angles
and fillets or radii in both internal and external applications and part-

Below is the CNC Lathe OD Tool Radius Compensation Calculator Main Screen:

The above screen is the OD Simple Lathe Cam Screen.

Just by clicking on one of the tools a dialog similar to the one below will appear:

Simple Lathe Cam can calculate the tool radius compensation needed to produce straight angles or angles with fillets or edge breaks and even generate the G Code needed!

Below is the Simple Lathe Cam ID Main Screen:

This is an example of an ID tool compensation calculation.

Below is an example of a "Parting-

With Simple Lathe Cam’s Cut-

The example above results in the screen below with all of the specific information
and the resulting cnc G-

Below is the Web Machinist 4.6 "Drill Peck Calculator" in action:

With the "Drill Peck Calculator" you can easily calculate drill cycles with automatically reducing drill peck amounts, specify dwells at specific intervals, all automatically! Very nice for deep hole drilling. Works for CNC Mills and CNC Lathes.

Above is the Web Machinist "Inspection Calculators" main menu. As you can see Web Machinist includes various inspection tools to help make part inspection easier and more efficient.

The "Sine Bar Sine Plate Set-

The "Gage Block Calculator" can calculate and list the gage blocks needed to obtain a desired gage block height from a standard 81 piece gage block set. A real time saver!

Above is the "Thread 3 Wire Measuring Calculator" where you can easily calculate the pitch diameter dimensions of both inch and metric threads when using thread wires.

Above is the "Circle Segment Calculator" where you can easily calculate the angle, segment length, height and circle radius.

Below is the "Area Calculator" where you can easily calculate the area of circles, squares, rectangles and hexagons.

Above is the main screen of the Web Machinist "Bolt Circle Calculator". You can easily Calculate "Full" Bolt Circle Patterns and "Partial Bolt" Circle Patterns, "Polar Point" Patterns and even Bolt Circle Patterns based on the "Chord" measurements. Even Common Wheel Bolt Circle Dimensions can be Calculated!

Below is an example of a "Partial" bolt circle pattern calculation.

Below is the main screen of the Web Machinist "Tapping Calculator".

The Web Machinist "Tapping Calculator" provides the tap drill sizes for both inch and metric taps. Cutting taps, form taps, roll taps and even helicoil taps. Feed rates and spindle speeds are also calculated and you can even calculate your own custom tap drill sizes!

Above is the Web Machinist "Threading Calculator". Easily calculate the thread dimensions
for threads 0-

The "Smart Drill Index" in Web Machinist 4.6 allows you to reference the Drill Size and print each chart for reference. If you click on any drill in any of the charts you will open the Drill Speeds and Feeds chart for that particular drill as seen below:

The Drill Speeds and Feeds chart provides calculated drill speeds and feed rates in both inches per revolution and inches per minute base on the drill size, metal alloy and metal condition.

The "Metal Weights Calculator" easily calculates the weights of 13 different metal groups and their alloys for shapes: Round, Rectangle, Square and Hexagon. Very useful when preparing job quotes.

Above is the "Soft Jaws Milling Calculator". You can easily calculate and program
the tool path for various soft jaws such as "Rectangle Pocket", "Left Stop", "Right
Stop", Through Jaws (no stop) or Circle Pockets". Very easy to use and fast! A real
time saver when making a machine set-

Above is the main screen of the Web Machinist “Speeds and Feeds Conversion Calculator”. There are 4 speed conversions available including: “Surface Speed in Feet Per Minute” to Revolutions Per Minute ( RPM), Revolutions Per Minute ( RPM ) to “Surface Feet Per Minute, “Surface Speed in Meters Per Minute” to RPM and RPM to “Surface Meters Per Minute”. Also included in the Web Machinist “Speeds and Feeds Conversion Calculator” are 12 Feed Conversions available including: “Inches Per Minute” to “Inches Per Revolution”, “Inches Per Revolution” to “Inches Per Minute”, “Inches Per Minute” to “Inches Per Tooth”, “Inches Per Tooth” to “Inches Per Minute”, “Inches Per Tooth” to “Inches Per Revolution”, “Inches Per Revolution” to “Inches Per Tooth”, “Millimeters Per Minute” to Millimeters Per Revolution”, “Millimeters Per Revolution” to “Millimeters Per Minute”, “Millimeters Per Minute” to “Millimeters Per Tooth”, “Millimeters Per Tooth” to “Millimeters Per Minute”, “Millimeters Per Tooth” to “Millimeters Per Revolution”, “Millimeters Per Revolution” to “Millimeters Per Tooth”. (See Above)

Above is the "True Position Calculator". You can calculate the True Position of holes with the Maximum Material Condition (MMC) callout or without it. Very easy to use and fast! A real time saver.

"Wheel Bolt Pattern Calculator".

Solving Right Triangles has never been easier. See above.

Below is the newly updated "Machining Formulas Reference Guide with Calculators". Now each of the formulas lists also has a built in calculator. Simply click on the calculator icon to open the calculator for that particular formula set. See below:

As an example if you were to click on the Calculator icon in the Cutting Speeds Formulas window, it would open the Cutting Speeds Calculator seen below:

In the Cutting Speeds Calculator seen above you can calculate RPM to Surface Feet per Minute or Surface Feet per Minute to RPM or Surface Feet per Minute to Surface Meters per Minute.

Below are more examples of the Web Machinist 4.6 Machining Formulas Reference Guide and Calculators:

Above is the Degrees Conversions Formulas Reference Guide.

The Degrees Conversion Formulas included are:

Converting Minutes of a Degree to a Decimal

Converting Minutes and Seconds of a Degree to a Decimal

Converting Decimal Degrees to Minutes

Converting Decimal Degrees to Minutes and Seconds

Converting Degrees to Radians

Converting Radians to Degrees

Below is the Degrees Conversions Formulas Reference Guide Calculator Screens:

The Drill point Depth Formulas Guide seen below list the formulas for calculating the drill point length of 60 degree, 82 degree, 90 degree, 118 degree, 120 degree, 135 degree tip angled drills. See below:

The Drill Tip Length Calculator seen above can easily calculate the drill tip length of standard drill point angles or you can input a custom angle for the calculation and have the drill tip length calculation output in either inches or millimeters.

Below is the resulting calculation from the example above:

Above is the Feed Rate Formulas Reference Guide. Formulas for the following are given in the guide:

Inches Per Minute (IPM)

Inches Per Minute (IPM)

Feed Per Revolution (FPR)

Feed Per Tooth (FPT)

Convert Inches Per Revolution (IPR) to Inches Per Minute (IPM)

Convert Inches Per Minute (IPM) to Inches Per Revolution (IPR)

Convert Inches Per Revolution (IPR) to Millimeters Per Revolution (MMPR)

Convert Inches Per Minute (IPM) to Inches Per Tooth (IPT)

Convert Inches Per Tooth (IPT) to Inches Per Minute (IPM)

Convert Inches Per Tooth (IPT) to Inches Per Revolution (IPR)

Convert Inches Per Revolution (IPR) to Inches Per Tooth (IPT)

Below is an example of the Feed Rate Formulas Guide Calculator in action:

As you can see in the Feed Rate Calculator screen shot above, you can easily perform feed rate calculations and conversions for:

Inches Per Minute (IPM)

Inches Per Revolution (IPR)

Inches Per Tooth (IPT)

Inches Per Revolution to Inches Per Minute

Inches Per Minute to Inches Per Revolution

Inches Per Revolution to Millimeters Per Revolution

Inches Per Minute to Millimeters Per Minute

Inches Per Tooth to Inches Per Minute

Inches Per Tooth to Inches Per Revolution

Inches Per Revolution to Inches Per Tooth

Above is the Metal Removal Formulas Reference Guide.

The metal removal formulas listed are:

Time Cutting in Minutes (TCM)

Time Cutting in Seconds (TCS)

Distance Over Time

Metal Removal Rate (MRR) (Cubic Inches Per Minute)

Below is an example of the Metal Removal Rates Formulas Reference Guide Calculator in action:

Above is the Metal Removal Calculator of the Machining Formulas Reference Guide. As you can see, you can calculate the following:

Time Cutting in Minutes, where you input the length of the cut and the feed rate in inches per minute and the Metal Removal Calculator will calculate the time it takes to make the cut in minutes and seconds.

Time Cutting in Seconds, where you input the length of the cut and the feed rate in inches per minute and the Metal Removal Calculator will calculate the time it takes to make the cut in seconds and minutes.

Distance Over Time, where you input the time the cut takes and the feed rate in inches per minute and the Metal Removal Calculator will calculate the distance of the cut in inches and millimeters.

Metal Removal Rate, where you input the width of the cut, the length of the cut and the feed rate in inches per minute and the Metal Removal Calculator will calculate the cubic inches of metal being removed per minute. See the example above.

Above is the Tapping Formulas Reference Guide.

The tapping formulas listed are:

Calculating Tap Drill Size for "Inch" Cutting Taps

Calculating Tap Drill Size for "Metric" Cutting Taps

Calculating Tap Drill Size for "Inch" Fluteless Roll Forming Taps

Calculating Tap Drill Size for "Metric" Fluteless Roll Forming Taps

Below is an example of the Tapping Formulas Reference Guide Custom Tap Calculator in action:

With the Custom Tap Calculator ( above ) you can calculate the tap drill size for Inch Cutting Taps, Inch Form or Roll Taps, Metric Cutting Taps, Metric Form or Roll Taps. Also the Custom Tap Calculator will calculate the spindle speed for common metals based of the tap calculated tap size and calculate the feed rate in inches per revolution, inches per minute and millimeters per revolution.

The True Position Calculator in the Machining Formulas Reference Guide ( above ) can calculate the true position tolerance for both True Position Only and True Position with Maximum Material Condition.