Web Machinist 8.0 is Now Available! Only $95.00 $45.00! Today Only!

50+ Machining Calculators are in the Program!

Only $45 Save $50 Click Here

Favorite Links:

<Now Included in the Web Machinist Software Program!

Machining Formulas Reference Guide

In the Machining Formulas Reference Guide included in the Web Machinist program (bottom), Formulas are provided for Cutting Speed Formulas, Degrees Conversion Formulas, Drill Point Depth Formulas, Feed Rate Formulas, Metal Removal Formulas, Tapping Formulas and a True Position Formula. Each Formulas Section also has a built in calculator related to the formulas provided (see below) Above is the Cutting Speed Formulas Section.

Above is the Degrees Conversions Formulas Section. It covers converting Minutes of a Degree to a Decimal, Converting Minutes and Seconds of a Degree to a Decimal, Converting Decimal Degrees to Minutes, Converting Decimal Degrees to Minutes and Seconds, Converting Degrees to Radians and Converting Radians to Degrees.

Each Formula Section has a Calculator related to the formulas.

Above is the Drill Point Depth Formulas Section. It covers 60 Degree Drill Point Angle, 82 Degree Drill Point Angle, 90 Degree Drill Point Angle, 118 Degree Drill Point Angle, 120 Degree Drill Point Angle, 135 Degree Drill Point Angle and Custom Drill Point Angles when using the Calculator.

Above is the Feed Rate Formulas Section. It covers Inches per Minute, Feed per Revolution, converting Inches per Revolution to Inches per Minute, converting Inches per Minute to Inches per Revolution, converting Inches per Revolution to Millimeters per Revolution, converting Inches per Minute to Inches per Tooth, converting Inches per Tooth to Inches per Minute, converting Inches per Tooth to Inches per Revolution, converting Inches per Revolution to Inches per Tooth.

Above is the Metal Removal Rate Formulas Section. It covers Time Cutting in Minutes, Time Cutting in Seconds, Cutting Distance Over Time in Minutes and Metal Removal Rate.

Above is the Tapping Formulas Section. It covers Basic Major Diameter of a Thread, Calculating Tap Drill Size for Metric Cutting Taps, Calculating Tap Drill Size for Inch Roll Forming Taps, Calculating Tap Drill Size for Metric Roll Forming Taps.

Above is the True Position Formula Section.

Advertisers:

Click Here to Order the Web Machinist Software